A102
The A102 model is an automatic electrical temperature sensing controller that can be used for heating or cooling applications with a range from -50 ºC to 100 °C. The A102 measures, indicates and controls the temperature by turning the relay on and off based on the setpoint chosen by the user.
User guide
Functioning option for cooling and heating applications from -50 to 100ºC
Dual-voltage equipment, capable of operating at 110 or 220 Vac
Eco mode, a second setpoint to be easily selected
Compatible with WebFi, Ageon monitoring system equipment
The A102 model is an automatic electrical temperature sensing controller that can be used for heating or cooling applications with a range from -50 ºC to 100 °C. The A102 measures, indicates and controls the temperature by turning the relay on and off based on the setpoint chosen by the user. The refrigeration mode can also work with configurable periodic defrosts (defrost when the compressor is switched off), with maximum intervals of 999 hours and a maximum duration of 999 minutes. This model has waiting time parameters (delays) for device energization and relay operation. Other functions present in the A102 are: eco mode, thermometer mode, support for WEB communication via RS-485 for the Arcsys and Arcsys Cloud monitoring system, temperature records, alarm and standby mode. The A102 has 6 keys with shortcuts to simplify the use of the temperature controller.
Power supply voltage: (110 or 220) Vac;
Rated power: 1,5 VA;
Relay output: Heating/Cooling (17 A / 250 Vac);
Measurement range: (-50 to +100) °C;
Resolution: 0.1 °C from (-50 to +100) ºC;
Operating conditions: (0 to 40) °C and (10 to 80) %RH (noncondensing);
Panel cutout: (70 x 29) mm (± 5%);
Protection index: Front panel (IP 65); NTC Sensor (IP 68);
NTC sensor: Ø6 mm / L=15 mm (sensor); Standard length 1,5 m (wiring).
Documents
A102 User Guide
Download
Cooling and Heating
With a temperature range of -50 to 100 °C, the A102 is a versatile controller, used for both heating and cooling. When used for cooling, it also allows for the management of natural defrosting.
Fixing options
A practical and versatile product! To facilitate the controller’s installation, the Black Line was designed with two set up options: clips and screws.
Eco Mode
Save energy with the A102! Activate the controller’s Economy Mode during periods of low refrigerator usage to raise the setpoint temperature and save energy.
Quick configuring with FastKey
How long does it take to configure multiple controllers? With FastKey, just a blink of an eye! FastKey copies the settings from an already configured controller and efficiently replicates them onto others with ease and convenience.
Remote monitoring with WebFi
Ageon’s monitoring system, WebFi, enables you to remotely monitor your Black Line controller via email alerts. It’s easy to configure and eliminates the need for a computer to be connected to the device for it to perform its function.
Frequently asked questions
Yes, the A102 is dual voltage, meaning the same equipment is compatible with both 127 V and 220 V power supplies. It is important to note that, for each supply voltage, the specific terminals must be used (refer to the manual for the power supply guidelines).
Press and hold the SET button, then use the up and down arrows to adjust the desired temperature. Once finished, release the SET button.
No, the equipment retains its settings and parameters even when powered off.
E1 is a sensor error. Usually, the sensor wire has disconnected from the terminal, requiring reconnection.
“LOC” indicates that the controller has been locked after configuration. We recommend contacting the technician who programmed the controller, as changing the parameters could void the warranty of the service provided by them.
