A103 PID-U
The A103 PID-U controller by Ageon is a device designed for the control of temperature and humidity in various applications. It features three outputs for temperature control (TRIAC), humidity (relay), and cyclical output (relay). With a user-friendly interface, it allows for simple setpoint adjustments to maintain desired levels of humidity and temperature. The controller utilizes PID (Proportional-Integral-Derivative) algorithms to ensure stable and accurate temperature regulation. Humidity control is achieved through relay activation, enabling both humidification and dehumidification processes.
User guide
Humidity control via relay with the possibility to humidify or dehumidify
Dual-voltage equipment, capable of operating at 110 or 220 Vac
Triac output with PID control for heating
Compatible with WebFi, Ageon monitoring system equipment
The A103 PID-U controller by Ageon is a device designed for the control of temperature and humidity in various applications. It features three outputs for temperature control (TRIAC), humidity (relay), and cyclical output (relay). With a user-friendly interface, it allows for simple setpoint adjustments to maintain desired levels of humidity and temperature. The controller utilizes PID (Proportional-Integral-Derivative) algorithms to ensure stable and accurate temperature regulation. Humidity control is achieved through relay activation, enabling both humidification and dehumidification processes.
It is ideal for environments that require consistent management of humidity and temperature. Its applications include HVAC systems, agricultural installations, and storage facilities, and it is particularly effective in incubators, where precise control of humidity and temperature is crucial for the successful incubation of eggs, while the relay output is responsible for egg turning. The A103 PID-U is the perfect choice for professionals seeking reliable and effective solutions for humidity regulation.
Supply voltage: (110 or 220) Vac;
Maximum power: 2 VA;
TRIAC output (resistive load only): 2 A / 250 Vac; 400W/220 Vac – 200W/110 Vac;
Humidity relay: 0.4 CV or 8 A / 250 Vac;
Auxiliary relay: 0.5 CV or 10 A / 250 Vac;
Measure range: Temperature: -20 to + 80 °C / Humidity: 10 to 90 %RH;
Resolution: 0.4 °C from (-20 to + 80) °C / 3.0 %RH from (10 to 90) %RH;
Operating conditions: (0 to 40) °C and (10 to 80) %RH (noncondensing);
Recommended panel cut-out: (70 x 29) mm (± 5%);
Front panel protection: IP 65;
Sensor module: Ø16 mm / L = 100 mm / Cable length 1 m;
Documents
A103 PID-U User Guide
Download
PID Heating control
The A103 PID U features three outputs: a TRIAC output for PID heating control (more precise than conventional controllers), a relay output for humidity control, and a cyclic timer output.
Fixing options
A practical and versatile product! To facilitate the controller’s installation, the Black Line was designed with two set up options: clips and screws.
Umidity control
A103 PID-U controller offers precise humidity regulation through a setpoint-based system, allowing for both humidification and dehumidification. It continuously monitors the environment and operate the output to maintain the target humidity level. Ideal for applications requiring consistent moisture control, such as HVAC systems, agriculture, and storage facilities, this controller ensures reliable performance and ease of use.
Quick configuring with FastKey
How long does it take to configure multiple controllers? With FastKey, just a blink of an eye! FastKey copies the settings from an already configured controller and efficiently replicates them onto others with ease and convenience.
Remote monitoring with WebFi
Ageon’s monitoring system, WebFi, enables you to remotely monitor your Black Line controller via email alerts. It’s easy to configure and eliminates the need for a computer to be connected to the device for it to perform its function.
Frequently asked questions
The A103 PID-U controller has a single sensor capable of monitoring both humidity and temperature in one device. This sensor should be installed in the environment you want to control. The sensor should not be immersed in liquids.
It can be used in applications such as salami production, automatic incubators, grain storage, medication storage, and mold control in wardrobe cabinets.
Yes, the A103 PID-U has both humidifying and drying functions. You can set the function (dry/humidify), the humidity setpoint, and hysteresis. Humidity control is managed through a relay that will control the load (such as a humidifier, sprinkler, or electronic dehumidifier).
Yes, the A103 PID-U is dual voltage, meaning the same equipment is compatible with both 127 V and 220 V power supplies. It is important to note that for each supply voltage, the specific terminals must be used (refer to the manual for the power supply guidelines).
The A103 PID-U controller is very versatile as it has three outputs: PID temperature control; Humidity control via relay; Timed auxiliary output via relay. You can use all the outputs (humidity control, temperature control, and egg rolling in automatic incubators) or just one (such as humidity control in grain storage).
